Войти
Регистрация
Публикации
N/A
+7-707-838-4634
Опубликовал: Привет. Не разжился еще нормальным оборудованием для калибровки мониторов? Срок жизни калориметра 2-3 года, да и штукенция не очень надежная, а судя по теме, 2015 год, устройство того времени будет врать.
Мы обсуждали этот вопрос со службой поддержки X-Rite. Они ответили, что срок службы моего колориметра 8 лет и более. Я верю им, потому что кто, как не они, заинтересован, чтобы я купил новое устройство. Колориметр произведен в 2013 году, обращаюсь с ним аккуратно, храню в сухом темном месте. В 2021 году планирую заменить его.
From: X-Rite Photo Europe <support@xritephoto.eu>
Subject: RE: Case #SC39656: Measurement accuracy degradation
Dear Till
The calibration of device should be fine for around 8 years or more.
In the i1 Display Pro we changed the gel filters that were used in the previous device (i1 Display 2) to special glass filters - dichroic filters which should in theory last forever unless the surface is physically damaged by fungus or mechanical damage.
The i1 Display Pro has been on the market for over 6 years and we have not seen any issues with filters or calibration.
Kind Regards
On behalf of X-Rite Photo Europe
Kos Kalim
The calibration of device should be fine for around 8 years or more.
In the i1 Display Pro we changed the gel filters that were used in the previous device (i1 Display 2) to special glass filters - dichroic filters which should in theory last forever unless the surface is physically damaged by fungus or mechanical damage.
The i1 Display Pro has been on the market for over 6 years and we have not seen any issues with filters or calibration.
Kind Regards
On behalf of X-Rite Photo Europe
Kos Kalim
From: Till Ulen
Subject: Case #SC39656: Measurement accuracy degradation
I have an i1Display Pro colorimeter that I purchased at B&H in November 2013. The part number is EODIS3-XR, the serial number is i1-13.A-02.XXXXXX.XX. The date below the serial number is 05/2013, Rev. A-02. It has been stored in a dry box at room temperature with no direct sunlight access. I used it occasionally...
Does the accuracy of the measurements performed with this instrument degrade over time? Does it have any shelf life or best before date?
Does X-Rite offer any factory recalibration services for my device?
Thank you.
Subject: Case #SC39656: Measurement accuracy degradation
I have an i1Display Pro colorimeter that I purchased at B&H in November 2013. The part number is EODIS3-XR, the serial number is i1-13.A-02.XXXXXX.XX. The date below the serial number is 05/2013, Rev. A-02. It has been stored in a dry box at room temperature with no direct sunlight access. I used it occasionally...
Does the accuracy of the measurements performed with this instrument degrade over time? Does it have any shelf life or best before date?
Does X-Rite offer any factory recalibration services for my device?
Thank you.
